Child Lock - Danby DAP290BAW Manuel Du Propriétaire

OPERATING INSTRUCTIONS
FEATURES
1. PM2.5 sensor
2. Gaseous pollutant sensor
3. Air outlet grill
4. Operation panel
5. Display screen
6. Handle
7. True HEPA fi lter
8. Pre-fi lter
9. Air inlet grill
Note: Filters are replicated on both sides of the air
purifi er. They are installed the same way on both
sides.
5
6
1
2
3
4
7
8
9
4
ON FIRST USE
When the air purifi er is plugged in for the fi rst time
it will go through a start up sequence that will take
approximately 1 - 2 minutes. During this time the
display panel and indicator lights will fl ash as the
appliance activates.

CHILD LOCK

Press and hold the fan speed button and the mode
button at the same time for 3 seconds to engage
the child lock. The buttons on the control panel will
not function when the child lock is engaged. Press
and hold the fan button and the mode button at the
same time for 3 seconds to disengage the child lock.
SLEEP
Press the mode button to activate sleep mode. This
mode will turn off the lights and indicators on the
control panel except for the sleep light and will run
the fan at a lower speed to ensure the air purifi er is
as quiet as possible during sleeping hours. Press the
mode button again to stop sleep mode.
TURBO
Press the mode button to activate turbo mode. This
mode will run the fan at high speed for a period
of time to purify a large amount of air in a short
period of time.