Audio Performance; Bluetooth; Other - Teac Tascam MZ-123BT Mode D'emploi

Audio performance

Frequency response
MIC INPUT w LINE OUTPUT
20 Hz - 20 kHz: +0.5 dB/-1.0 dB
(when GAIN knob at minimum, VOLUME knob at 0 dB,
JEITA)
LINE INPUT w LINE OUTPUT
20 Hz - 20 kHz: ±0.5 dB
(when GAIN knob at minimum, VOLUME knob at 0 dB,
JEITA)
Distortion
MIC INPUT (front) w LINE OUTPUT
0.02% or less
(when GAIN knob at minimum, VOLUME knob at 0 dB,
JEITA)
MIC INPUT (rear) w LINE OUTPUT
0.01% or less
(when GAIN knob at minimum, VOLUME knob at 0 dB,
JEITA)
LINE INPUT w LINE OUTPUT
0.01% or less
(when GAIN knob at minimum, VOLUME knob at 0 dB,
JEITA)
S/N ratio
MIC INPUT w LINE OUTPUT
90 dB or higher
(when GAIN knob at minimum, VOLUME knob at 0 dB,
JEITA)
LINE INPUT w LINE OUTPUT
90 dB or higher
(when GAIN knob at minimum, VOLUME knob at 0 dB,
JEITA)
Crosstalk
MIC INPUT w LINE OUTPUT
80 dB or higher
(when GAIN knob at minimum, VOLUME knob at 0 dB,
JEITA)
LINE INPUT w LINE OUTPUT
80 dB or higher
(when GAIN knob at minimum, VOLUME knob at 0 dB,
JEITA)
Mic amp EIN (equivalent input noise)
MIC INPUT w LINE OUTPUT
-125 dB or less
(150Ω, 20kHz LPF, A-weight)
p JEITA: indicates compliance with JEITA CP-1301A
18
TASCAM MZ-123BT

Bluetooth

Bluetooth version: 4.2
Output class: 2 (about 10m* unobstructed transmission
distance)
Supported profile: A2DP
Supported A2DP codecs: SBC, AAC, Qualcomm®aptX™ audio
Supported A2DP content protection: SCMS-T
* The transmission distance is only an estimate and might vary
depending on the surrounding environment and radio wave
conditions.

Other

Power
AC100-240 V, 50/60 Hz
Power consumption
25 W
Dimensions
483 × 46.5 × 274.8mm (W x H x D, including protrusions,
excluding Bluetooth antenna)
Weight
3.0 kg
Operating temperature range
0 - 40°C (32 - 104°F)
p Illustrations in this manual might differ in part from the
actual product.
p Specifications and external appearance might be changed
without notification to improve the product.