Publicité
Amy 1 io
1] Press the Up or Down button to send the motorised product in the desired
position.
2] Briefly press my to stop the motorised product in the desired position.
3] Press and hold my until the activation of the motorised product to save or to
modify the favourite position (my).
3.4.Checking the battery level
When the battery level is low, the feedback LED on the front of Amy 1 io dims
progressively during activation of the motorised product(s). When the battery is too
weak, the control point can no longer transmit radio orders, its operation is inhibited.
Battery status can be checked on TaHoma application, if Amy 1 io has been added in TaHoma, and an alert may be sent out
if this feature is activated (Follow the instructions in TaHoma application).
3.5.Use with TaHoma
A temperature sensor, not visible, is embedded into Amy 1 io.
This sensor works in combination with TaHoma where it appears as an indoor temperature sensor.
When Amy 1 io is added in TaHoma application and the temperature feedback to TaHoma is activated on Amy 1 io, the
sensor measures the temperature inside the room (around Amy 1 io) and sends the measured values to TaHoma. These
temperature values can be consulted in TaHoma and can then be used for scenes to optimize home automation.
CAUTION
Be careful in case of wind!
Automation provided by TaHoma and Amy 1 io allows the automatic use of a motorised product when the
temperature of the room equals a certain threshold, without consideration of the wind.
To maximize the protection of the motorised product from the wind and limit the risk of breaking, use a wind sensor
paired with the motorised product (sold separately).
In any case, a wind sensor does not protect against sudden gusts of wind. In the event of such weather risks,
deactivate the embedded temperature sensor (see below).
3.5.1.Adding Amy 1 io in TaHoma
To add or delete Amy 1 io in TaHoma, you need to access and use a TaHoma switch and TaHoma application:
you must have a compatible phone or mobile device.
The application is downloadable for free from Apple Store platforms and Google Play Store on the following mobile
devices:
▪ Apple iPhone
®
mobile phone or mobile device with iOS operating system running iOS and later.
▪ Mobile phone or mobile device with operating system Android
The software version of the TaHoma application may be updated from time to time to add new features and services.
To add or delete Amy 1 io in TaHoma, follow the instructions in TaHoma application.
©
Copyright
2024 SOMFY ACTIVITES SA. All rights reserved.
1]
2]
3]
5 s
™
OS and later.
EN
11
Publicité
