Publicité
Maintenance and care
6.2
Trouble shooting
ERROR
The clamping-power is not big
enough, the load is slipping out
Adjustment of the gripping range
if available
(
)
Property of material
Unbalanced load
Adjustment of the gripping range
if available
(
)
53100447
CAUSE
•
The grippers are worn
•
The maximum load is exceed
•
The actual opening width is not
correct
•
The surface of the material is dirty
or the material is not suitable /
allowed for this device.
•
The device is not loaded
symmetrically
•
The adjustment of the gripping
range is not symmetrical.
19 / 21
REPAIR
•
Replace the grippers
•
Reduce the weight of. the load
•
Adjust the gripping range according
to the load you want to transport
•
Check the surface of the material
or ask the manufacturer, if you the
material is allowed for this device.
•
Adjust the position of the load
•
Correct the adjustment of the
gripping range
GB
Publicité
