Function And Feature Description - Renkforce M.A.R.L.I.S. Notice D'emploi

6. Function and Feature Description

The PA speaker set consists of a subwoofer and two satellite speakers.
The input signal is separated in bass and midrange tone shares in the subwoofer by an active frequency switch. The
bass shares are amplified by the bass end stage and converted into low-frequency sound waves via the subwoofer.
The midrange tone shares are also amplified by a subwoofer end stage and converted into sound waves via satellite
speakers.
The subwoofer is installed in a bass reflex casing that also contains the entire amplifier electronics. The satellite
speakers are constructed in 2-way technology.
All casings are protected well from mechanic strain with carpet application.
The satellite speakers can be set up with speaker stands that can also be connected to the subwoofer speaker flange.
Features:
• Vibration-free metal grids (at satellites and subwoofers)
• Air-tight grips
• Aluminium speaker flanges
• Resilient carpet surface
• SPK connection terminals
• Symmetrical XLR input sockets and asymmetric cinch inputs
• Additional microphone and MP3 input with level controls
• Bluetooth interface for easy connection of mobile devices
®
• Main level controller
• Sub level controller
• Phase reversing switch for the subwoofer
• Filterless cooling
• Fully symmetrical end stage setup
• Perfectly short-circuit proof
• Limiter for subwoofer and satellite end stages
• 3 channel end stage RMS/MAX 400/800 W
24