Publicité
Les langues disponibles
Les langues disponibles
7. Safety instructions
The following safety instructions should be read in conjunction with the following standards:
standard NF C 15 100
standard EN/IEC 60079-14 (Electrical installations design, selection and erection)
standard EN/IEC 60079-17 (Electrical installations inspection and maintenance)
standard EN/IEC 60079-31 (Equipment dust ignition protection by enclosure "t").
decrees, laws, directives, circulars of application, standards, rules of art and any other documents
concerning its place of installation
It is strictly forbidden to change anything on and in the enclosure without our prior agreement
Make sure the compatibility between the data on the nameplate of the enclosure with the existing
explosive atmosphere, the area of use, the ambient temperature and surfaces temperatures
Any damage of the equipment can have for consequence to make ineffective the explosion-proof protection
The installation of the enclosure have to be performed in the state of the art in the technical domain
and only by qualified, competent and authorized person.
A defective or abnormal use as well as the non-observance of the instructions of this document
exclude any clause of of guarantee and do not engage our responsibility.
According to the standard IEC 60079-31, it is prohibited to operate the enclosure if the dust
thickness on it is greater than 50 mm.
Ex-tech Solution ensures the traceability of the enclosures up the first place of delivery.
During the installation, the user will take into consideration that the lighting and command
elements type XBW... or XLW... underwent only a shock corresponding to an energy of a low risk.
XAW170A12-02 01/12/2016
Operating instructions
Incresead safety pendant control station - XAWP series
ENG
9/12
Publicité
