RCF AM2160 Manuel De L'utilisateur page 27

INFORMATION ABOUT THE CHIME
The chime is not played when using the channel 1 VOX function (a priority command is needed to
play the chime).
Its melody can be either short or long (dip-switch no.7 of the 8 dip-switch group, see 20).
SHORT LONG
When the chime is playing (a few seconds), the selected aux input is not sent to the amplifier.
RCF BM 3001 PAGING MICROPHONE (NOT INCLUDED)
Channels 2 and 3 have an input with RJ 45 socket, to which a BM 3001 paging microphone can be
connected (note: it is necessary to set the dip-switches no.3 and no.4 to the '-20 dBu + PHANTOM'
mode, see 10, second table).
i
When the BM 3001 paging microphone is on (ready to talk), its LED turns ON.
When the chime is playing (if chime is enabled), the BM 3001 microphone is momentarily muted.
The paging microphone priority mode depends on the settings mentioned above.
The paging microphone is muted by events having a higher priority level (than the channel 2 or 3, to
which the paging microphone is connected).
27