Working Environment; Assemble Battery - Kamikaze KV 3 Manuel D'utilisation

ELECTRONIC TYING MACHINE

11. WORKING ENVIRONMENT

• Keep temperature of environment at 0°C ~ 45°C when charging battery,
-10°C ~ +60°C when battery is working.
• Keep tool at temperature of -5°C ~ 30°C when working.

12. ASSEMBLE BATTERY

Please check if tying machine, electric wire, and battery are clean and dry, then
conduct assembly according to the following steps:
• Take backpack out of plastic box
• Check if battery switch is in OFF state. Only when it is in OFF state can
the power line of tying machine be connected to battery plug and it shall
be locked tightly.
• Snap waist tying tape.
• Open back cover, after installing the wire, check and ensure that the wire
at the feeding inlet of tying machine is not twisted or knotted, and check if
the installation direction of feeding tray is correct.
See the following figures:
70
www.kamikazevolpi.com