Publicité
● Disconnect the plug from the power source and/or the
EN
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk
SV
of starting the power tool accidentally.
● Store idle power tools out of the reach of children and
NO
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
PL
● Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
DE
parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused
FI
by poorly maintained power tools.
● Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
FR
account the working conditions and the work to be
performed. Use of the power tool for operations
NL
different from those intended could result in a
hazardous situation.
● Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
1.10 Battery tool use and care
● Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
● Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
1.11 To minimized noise and vibration
exposure
● Plan the work so that exposure to heavy vibrations is
spread over a longer period.
● To reduce noise and vibrations when in use, limit the
time the tool is in use, and use low-power/vibration
mode and suitable safety equipment.
● Take the following precautions to minimise the risks of
exposure to vibrations and/or noise:
● Check that the tool is in good condition.
● Only use accessories that are in good condition, and
suitable for the job.
● Keep a firm grip on the handles/grips.
10
1.12 Sprayer safety warning
Warning! Do not get spray in your eyes. If you get
spray in your eyes, rinse immediately with clean water.
Seek medical attention as soon as possible if your eyes
are irritated.
Warning! Electrical safety! Do not spray on power
points or electrical installations.
Caution! Before chemicals are used, refer to the
information on the label on the original container and
follow all the instructions.
● Do a check for leakage before use. Any leakage must
be repaired before the product is used.
● Do a check of the product internally and externally,
and examine all components before use. Make sure
that hoses are not cracked or show signs of fatigue,
nozzles are not blocked and that no parts are missing
or damaged. If the product is damaged it must be
repaired before use. Many accidents are caused by
poorly maintained products.
● Do not use the product if the guards or covers are
dismantled or damaged. Do not use the product
without the safety devices. Do not change the product
in any way or remove components, there is risk of
serious personal injury and material damage.
● Use personal safety equipment to prevent the risk of
injury.
● Wear correct clothing, shoes and safety equipment in
the following situations.
• When you fill the spray tank with liquids.
• During use.
• When you do adjustments.
• When you empty and clean the spray tank.
• When you change the spray.
• When you maintain the product.
● Do not spray near flames, sparks or other sources of
heat.
● Only use liquids approved in accordance with the
relevant directives for use with a sprayer and harness.
Always follow the instructions of the chemical
manufacturer on the container label concerning use,
cleaning and storage. Store chemicals out of the reach
of children.
● Only use liquids that has properties you are familiar
with.
● Do not blow through the nozzle or other components
with your mouth.
Publicité
