AIRFORCE INNOVA Visio Pro Prescriptions De Montage Et Mode D'emploi page 33

Power regulation
Energy saving tips
Hob Control
OPERATION
AVVERTENZE
Heating power of the hotplates may be set at ten different levels.
Power Purpose
setting
0 Off, using remaing heat
1-2 Maintaining warm food, slow simmer of smaller quanities
3
Slow simmer (continuation of cooking after a powerful start-up)
4-5 Slow cooking (continuation of larger quantites, roasting larger chunks)
6 Roasting, Browning
7-8
Roasting
9 Start of cooking, roasting
A Automatic heat up
P Especially powerful setting for extremely large quantities of food
The following chart indicates illustrative use of each power setting.
• When buying pots, be careful in selecting size: pot diameter usually refers to the top
edge of the pot, which is often larger than the bottom;
• Steam-pressure pots, which use pressure in tightly sealed interior, are especially
economic, and save both time and energy. Shorter cooking time leaves more vitamins in
food;
• Always leave enough water in steam-pressure pots, otherwise it may result in
overheating which may damage both the pot and the appliance;
• Always cover pots with lids of appropriate size;
• Use such pot size to accommodate the quantity of food to be prepared.
After turning the ceramic glass hob on all displays come on for a moment. The hob is
"
ready for operation.
• The hob is fitted with electronic sensors which are switched on if you touch the relevant
circle for at least one second.
• Each sensor activation is followed by a sound signal.
• Avoid placing any objects on sensor surface (possible error signalization
• Always keep the sensor surface clean.
8
1. ON/OFF hob
2. Key-lock
3. Pause and recall
4. (-) Timer
5. (+) Timer
6. Timer
7. Slide control
8. Warming
7
30
33
).
6
4 5
Timer
2 1
3
GB
I