Timer
Oscillation
WI-FI AND SMART LIFE SET-UP
― ―
Smart Life is a centralised app for smart device management. Control your unit from the
Smart Life app, set up schedules to turn your unit on and off.
Note: Ensure your Wi-Fi network is set to 2.4GHz for successful pairing.
Pair Your Device in 4 Steps:
1.
Register: Download the Smart Life app on the Google Play or
Apple app store. Sign in/register for an account.
2.
Prepare your device: Once you're all signed in hold down the fan
speed and oscillate buttons for 3 seconds, to turn on the unit's
Wi-Fi pairing mode.
3.
Add your device: Once the unit is in Wi-Fi pairing mode, open
the Smart Life app press "+" in the top right corner and press
"add device".
4.
Pair your device: Then the app will scan for devices and then
your unit (if it is in pairing mode) will show up as shown below.
Press add. Then type in the password for the Wi-Fi your phone is
on. Now your unit is connected to the Smart Life app.
When the room
temperature is too high or
too low
You can set your fan to turn off/on automatically in 1-hour
increments from 1-12 hours. To set a turn-on timer press the timer
button on your remote or control panel when the unit is off (but
still plugged into the mains) until the correct time displays on the
led display. To set a turn-off timer press the timer button on your
remote or control panel when the unit is on until the correct time
displays on the led display. To turn this mode off, continue pressing
the timer button until there are no lights lit on the timer section of
the control panel.
Press oscillate button once on your remote or control panel to start
or stop fan oscillation.
Warning: Please do not manually turn the appliance as this may
damage the oscillation mechanics.
English | 15 of 125
<31°C
The fan speed level will decrease by 1
level when the room temperature has
decreased by 1°C.
<10°C
The fan speed level is set at Level 1 by
default.
≥40°C
Auto mode will be deactivated by
default and will not be automatically
resumed when the room temperature
drops. (When the auto mode is
deactivated, the fan will switch back
to natural mode.)
Scan the QR Code
to Download the App