Publicité
Especialistas en
colectividades
Installation Guide
1.
Drill four holes in the wall according to the measurements
provided in the template. Insert the wall plugs into the holes.
102.5 mm
135 mm
102.5 mm
2.Attach the template to the wall using the screws. Insert
the screws through the four holes in the template.
3. Tighten the safety screw, which are shown in the figure. The
installation is now complete. Connect the power cord to the
mains and the dryer is now ready for use.
FLOOR
Especialistas en
colectividades
17
Publicité
