Télécharger Imprimer la page

Performance Power W85034 Manuel Du Propriétaire page 3

Publicité

• Do not alter this product in any way and never use it other than for its intended purpose.
• DO NOT exceed rated capacity. Overloading the creeper can cause damage to or failure of
the creeper.
• Use only on hard, level surface capable of sustaining the load. Use of creeper on other than
hard level surfaces can result in creeper instability.
• DO NOT stand on creeper. Serious injury can result if the tool tips over or you accidentally
come in contact with the creeper.
• DO NOT expose to heat, sparks, open flame or other high temperature sources.
• Creeper service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
• When servicing a creeper, use only identical replacement parts - refer to attached, product-
specific parts list and diagram. Follow instructions in the Care & Maintenance section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions may create a
risk of injury and may void any applicable warranty
• Maintain labels and nameplates on the creeper. These carry important information. If
unreadable or missing, contact Performance Tool
CONTENTS
No. Description
1
Headrest/Seat Pad ......................................................................1
2
Middle Pad ...................................................................................1
3
Bottom Pad ..................................................................................1
4
2 in. Swivel Casters .....................................................................6
5
14 x 55 mm Hex Head Bolts ........................................................4
6
14 mm Hex Locknuts ...................................................................4
7
Recessed Hex Cap Screws .........................................................4
8
14 mm Wrench .............................................................................2
9
5 mm Cap Screw Hex Key ...........................................................1
for a replacement.
®
Qty.

Publicité

loading