Standard Accessories; Mounting And Operation - Hitachi Koki UJ 18DSL Mode D'emploi

Power switch
Remaining battery power indicator switch
Remaining battery power is FULL.
Remaining battery power is HALF.
Remaining battery power is LOW and should be
recharged as soon as possible.
Warning

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the
accessories listed in the below.
○ USB adapter (BSL18UA(SA)) ..................................... 1
Standard accessories are subject to change without notice.
The previous BSL18UA model USB adapter cannot be
used. (The shape of the DC12V output port is diff erent.)
APPLICATIONS
This heated outerwear is intended to keep the body warm in
cold environmental conditions.
SPECIFICATIONS
<UJ18DSL>
Size
Rated input
Rated output
ON/OFF and heating stage
switches
Manual
Heating stages
Auto
<BSL18UA(SA)>
Battery (sold separately)
Input voltage
Output port
Remaining battery power indicator
Battery overdischarge protection
Auto power-off time
External dimensions (LxWxH)
(battery not included)
Weight (battery not included)
NOTE
Hours of continuous use (example)*
(when fully charged)
Battery Voltage (V)
Battery capacity*
Heating
stage*
*1 Hours of continuous use will vary depending on factors
*2 indicates nominal values
*3 when front and rear are in the same mode

MOUNTING AND OPERATION

XS, S, M, L,
XL, XXL, XXXL
12V DC / 1.4A
16.8 W
2 (independent front
and rear)
High, Medium, Low
*1) The lamp will turn off several seconds after the remaining
Fast heating
(immediately after
CAUTION
power-on only)
•
NOTE
BSL 14xx / BSL 18xx
•
14.4 / 18 V
Li-ion battery
USB output x 2
(5V, total 2A)
<BSL18UA(SA)>
DC12V output x1
NOTE
(2A)
•
3 stages
Yes
•
120 minutes
92 x 75 x 56 mm
150 g
•
5
Due to HITACHI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
18
(Ah) 1.5
2
approx. 1.6
High
Hours
approx. 2.4
Medium
Hours
3
approx. 4.5
Low
Hours
such as battery type and usage.
Action
Removing and inserting the battery
Switch operation (USB adaptor)
Remaining battery power indicator
Connection of a heated outerwear
and the USB adapter
How to use hook of USB adaptor
Switching between the High (Fast
heating mode) heating stage and
OFF
Set heating stages
Switching from the High, Medium or
Low heating stage to OFF
Selecting accessories
battery power indicator switch is released.
Ensure that the battery and power plug are inserted
fi rmly into the USB adapter. If they are not fi rmly inserted,
there is a risk of unexpected accidents.
When switching on, the High (fast heating mode) stage
is always set.
If no changes are eff ected to the heating stages, the
heating output is automatically reduced to the medium
heating stage after approx. 5 minutes.
When the battery has been installed to the unit, the
remaining battery power indicator lamp will light up when
the switch is pressed.
To prolong the life of the lithium-ion battery, the product
features a protection function that cuts off power output
when the battery voltage is low. As a result, the light will
suddenly switch off when the battery voltage is low.
Recharge as soon as possible.
To prevent the light from being left unattended and
switched on, the product features an automatic power
shutoff function that automatically switches off the power
after 120 minutes has elapsed. To continue use, press
the switch once again.
English
1
14.4
6.0 1.5 6.0
approx. 6.5 approx. 1.3 approx. 5.2
Hours Hours Hours
approx. 9.5 approx. 1.9 approx. 7.5
Hours Hours Hours
approx. 18 approx. 3.6 approx. 14.4
Hours Hours Hours
Figure Page
7 78
8 78
9 78
*1
10 78
11 78
12 78
13 79
14 79
― 80