Sharp BK-BD03E Mode D'emploi page 18

__________________________________________________________________________________
The 4 LEDs light up to indicate the charging status.
● ● ● ●
● ● ● ◌
● ● ◌ ◌
● ◌ ◌ ◌
Inserting/removing the battery
The battery on the bike is located in the rear rack and is connected directly to the control unit.
Note: Before handling the battery, make sure the display is switched off.
To install the battery, slide the battery block along the rail horizontally and press to ensure it is inserted
correctly, then lock
To lock it, insert the key into the lock and turn it towards the lock symbol.
To unlock, carry out the same procedure in reverse.
LED CHARGE LEVEL
100%
80%
50%
< 20%
18