Web Interface - Rane TERMINAl 1010x Guide D'utilisation Rapide

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

OUTPUTS
Connect Outputs 1–8 to mono zones, and Outputs 9–10 to a single stereo zone, as follows:
Output 1: Mono Zone 1
Output 2: Mono Zone 2
Output 3: Mono Zone 3
Output 4: Mono Zone 4
Output 5: Mono Zone 5
Connect the outputs to a power amplifier according to your needs, then connect the amplifier
to speakers in each zone. Place the speakers connected to Outputs 9 and 10 in the same
room as a stereo left/right pair for proper audio playback.
All outputs feature a -6 dBFS limiter to protect drivers and avoid saturation.
Once all connections have been made, test or use your system by connecting the power cable
to power on Terminal 1010x.
CONNECT USING HALOGEN
Use the Halogen software to modify the default configuration or apply a template downloaded
from the Halogen Wizard. Connect Terminal 1010x to a router or similar access point
integrated with your LAN Network. You don't need a static IP; Halogen will find the Terminal
1010x unit using our proprietary RaneLink auto-discovery service.

WEB INTERFACE

You can use the web interface to control sources and levels remotely. Press the Home button
on Terminal 1010x until the Wired Network Settings appear on the display, and then make
note of the DHCP IP address (e.g., 10.10.10.182). Type this address into a web browser to
load the web interface.
The earliest supported operating system is Windows 7 with SP1, 32-bit or 64-bit.
RESTORE PARAMETERS
If power to Terminal 1010x is lost at any time, the system will restore your previous
adjustments including source selection and level control for all zones, ensuring that your
system is always set as you intended.
READY TO GO
Once you have checked your system and set all sources and levels, you can close the web
interface and enjoy your system.
For more system applications and design templates, or to get your own custom configuration
built, please visit ranecommercial.com.
Output 6: Mono Zone 6
Output 7: Mono Zone 7
Output 8: Mono Zone 8
Output 9: Stereo Zone 9 Left
Output 10: Stereo Zone 9 Right
5

Publicité

Table des Matières
loading

Produits Connexes pour Rane TERMINAl 1010x

Table des Matières