Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Charging
The shaver must be charged before first
use. The display (6) shows the charging
status of the battery. If the battery is al-
most empty, this is signalled by a tone. To
recharge the battery, connect the machi-
ne to the mains supply. Use the USB char-
ging cable supplied and connect it to the
USB charging adapter. Alternatively, any
USB slot connected to the power supply
can be used.
Shaving
To start shaving, press the power button
(5) located on the front of the shaver. Pull
the razor slowly and smoothly over the
areas to be shaved. To trim longer hair
you can activate the trimmer (7) by briefly
pressing the trimmer release (8).

Travel lock

Press and hold the on/off button (5) for
3 seconds to activate the travel lock. An
acoustic signal confirms that the lock has
been successfully activated. The lock sym-
bol appears on the display (6). Repeat the
procedure to unlock the travel lock.
Display
The number in the display shows how
much time remains for shaving before the
unit needs charging. A small plug symbol
appears when charging is soon required.
The tap symbol serves as a reminder to
wash the device regularly. When the sym-
bol is displayed, a short tone is heard.
14

Publicité

Table des Matières
loading

Table des Matières