Installing The App - Conrad Electronic Renkforce A610 Mode D'emploi

There also are slight deviations in individual illustrations
between the "iOS-app" and the "Android-app". The fig-
ures shown in these operating instructions have been
generated for the Android operating system.
Generally, software is changing continually and can
change visually due to updates. The respective handling
is not affected, however.
a) Installing the App
A special app can be used to display the measured results on your
tablet or smartphone. There are suitable apps available for this
for devices with the operating system "iOS" (Apple products, as of
version 7.1) and the operating system "Android" (as of version 4.3).
The app can be installed in different languages.
Connect your mobile end device (tablet or smartphone) to the
internet and find the app "BTLogger" (see figure 3) in the "App
Shops" matching your operating system (see figure 2). Install the
app on your device. The app is free of charge. At most, the costs
that would usually arise for downloading an app will arise.
Figure 2
38
30
20
10
Figure 3