Publicité
Amy 1 Modes io
▪ Mobile phone or mobile device with operating system Android
The software version of the TaHoma application may be updated from time to time to add new features and services.
To add or delete Amy 1 Modes io in TaHoma, follow the instructions in TaHoma application.
3.5.2.Activation/Deactivation of the temperature feedback
NOTICE
To do next steps, Amy 1 Modes io must be switched on, with the front panel buttons activated (refer to Switching on
Amy 1 Modes io).
By default, the temperature feedback to TaHoma is deactivated on Amy 1 Modes io.
1] To check whether the temperature feedback to TaHoma is activated or
deactivated:
Briefly press once the On/Off button to see the settings feedback LED corresponding
to the current status:
▪ Orange LED blinks 4 times: the temperature feedback is deactivated.
▪ Orange LED blinks 2 times: the temperature feedback is activated.
2] To activate/deactivate the temperature feedback to TaHoma:
Briefly press twice successively the On/Off button to activate/deactivate the
temperature feedback:
▪ Orange LED blinks 2 times: the temperature feedback is activated.
▪ Orange LED blinks 4 times: the temperature feedback is deactivated.
3.6.Replacing the battery
DANGER
Read the Safety instructions document.
Explosion risk if the battery is replaced by an incorrect type.
©
Copyright
2024 SOMFY ACTIVITES SA. All rights reserved.
™
OS and later.
1]
0.5 s
0.5 s
2]
x2
0.5 s
x2
0.5 s
EN
13
Publicité
