Publicité
2
Use
power level to 0.
sensor for 2 seconds, the related zone
RESIDUAL HEAT INDICATOR
The power indicator of the hot plate will
display an H when the glass surface
reaches a temperature that could
cause burning.
When this risk disappears,
Warning:
in a short time on the power
display. This showing is related
with setup operation and it does
not mean the
Warning:
H indication is used for the safety
purposes in any case. Even if the
power on, H indication appears.
SWITCHING OFF THE DEVICE
time by pressing the general on/off
touch key
H will appear in the zones that are hot.
The rest of the displays will not light up.
Double burner hot plate
If your cooker has this option, the
double burner hot plate offers the
possibility of using the inside ring or
also, in addition, the outside one,
depending on the size of the pot or
pan.
SWITCHING ON THE DOUBLE
HOT PLATE
1 The related hot plate must be
selected.
2 Select the desired power (from 1 to
9) using the touch key
3 Press the double hot plate touch
key
(6) to activate the double
burner. When the double zone will
be activated, double zone indicator
(8) light on.
14
SWITCHING OFF THE DOUBLE
HOT PLATE
1 The key, by which its double burner
hot plate was switced on previously
is selected.
and
2
Press the double hot plate touch
key
(6)
burner. The double burner indicator
(8) will light off and the outer ring will
be deactivated
VitroTech Function
If
your
cooker
VitroTech function offers the possibility of using
the right front zone, right left zone and the
zone
between
depending on the size of the pot or pan.
SWITCHING ON Bridge Function
1.Press 2c and 2d at the same time min
2sec.
When the bridge function will be activated,
VitroTech zone indicators light on.
2.Select the desired power (from 1 to 9)
using
the
SWITCHING OFF VitroTech Function
1.Press 2c or 2d or 2c and 2d at the same
time min 2sec.
When the VitroTech function will be
deactivated, bridge zone indicators light off.
Locking of the touch keys
of the cooking hob
To prevent undesired manipulation you
can lock the entire unit, except for the
key
child safety. When the lock is activated,
However, remember when the touch
the lock is activated (the lock indicator
On the other hand, if the touch control
is switched off, the locking function
or
(4/5).
To deactivate the locking function, press
the locking touch key
control will be ready for use.
to deactivate the double
has
this
option,
the
them
at
the
same time,
touch
key
or
(4/5).
t h e
CHILD LOCK
complicated than key lock. User can
activate key lock via one sensor. But
child lock need a sensor sequence.
The Child Lock is being used to prevent
children from turning on the hob.
Activating Child Lock :
1. The hob is switched on via
2. Any zone should not be selected.
When any zone is not selected,
touch simtaneously the increase
power key
(5) and the decrese
power key
(4) for 3 seconds. Then,
a short buzzer sound will be heard.
3. After buzzer signal ,touch the
touch
key
(there
and a long buzzer sound is heard
and the Child Lock will be activated
and all power display shows "L".
During Child Lock, if user touch any
Warning : Child lock status is not being
stored. If the energy of the hob is butted,
child lock status could not be preserved.
Deactivating Child Lock :
To be able to deactivate Child Lock, the
Child Lock should be activated before
and all power display show "L"
1.
Touch simtaneously the increase
power key
(5) and the decrese
power key
(4) for 3 seconds.
Then, a short buzzer sound will be
heard.
2.
After the buzzer signal, touch the
locking touch key (there is no need
to press for a long time) and a long
buzzer sound will be heard. Then,
the Child Lock will be desactivated
and the indicator will be light off.
Flash Cooking
(Automatic cook start)
This function facilitates cooking as
you do not need to be present while it
is being done. The touch control pre-
programmes the chosen hot plate at
the maximum power and subsequently
lowers it to the desired power level
locking
is
no
Publicité
