Allen + Roth LWS1176E Mode D'emploi page 8

ASSEMBLY INSTRUCTIONS
10. Pull the supply wires up through the fixture chain
(JJ), alternating links. Push the wires up through
the canopy chain loop (HH) into the outlet box.
11. Unthread the canopy lock ring (II) and slide canopy
lock ring (II) and ceiling canopy (KK) down the
fixture chain (JJ). Push all slack fixture wire through
canopy chain loop (HH) into outlet box. Trim excess
fixture wire, leaving a minimum of 6 in. hanging out
of the outlet box. Refer to the next step to connect
the wires. Then re-secure the ceiling canopy (KK)
with canopy lock ring (II).
10
11
Lowes.com/allenandroth
8
KK
HH
JJ
Supply Wires
Outlet Box
HH
JJ
KK
II