PRO-POINT 9109828 Mode D'emploi page 5

V1.0
1. Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an
unintended purpose.
2. Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3. Industrial applications involving this tool must adhere to OSHA
requirements.
4. Always keep all guards in place and in proper working condition.
5. Never stick your hand or any other body part into the drum while the
mixer is in operation.
6. Allow the engine to cool adequately after operation before
attempting to touch or move the tool.
7. Do not overload this cement mixer beyond its capabilities (see
Specifications).
8. Never attempt to move the mixer when it is in operation.
9. Always ensure the drum has been emptied of contents before
powering off the mixer.
Warning! Always shut the engine off and allow to cool
before fuelling. Never add fuel to a machine with a
running or hot engine. Move at least 10 ft. from the
refuelling site before starting the engine to avoid an
explosion or fire.
1. Use only an approved fuel container
2. Store fuel out of direct sunlight in a cool and dry location.
3. Keep away from exposed, live electrical parts and connections.
4 Inspect container for fuel leaks. Replace any container that leaks.
5. Let engine cool for at least two minutes before removing the fuel cap.
6. Fuel cans may be under pressure due to temperature. Loosen fuel
caps slowly, allowing the pressure to equilibrate.
7. Clean the fuel cap area of dirt and debris. Do not allow dirt or water
to enter the fuel tank.
Visit www.princessauto.com for more information
9 cu. ft 212cc Cement Mixer 9109828
5