PRO-POINT 9109828 Mode D'emploi page 4

9109829
1. Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply
with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of work
performed.
2. Wear gloves that provide protection based on the work materials or
to reduce the effects of tool vibration.
2.1 Do not wear gloves when operating a tool that can snag the
material and pull the hand into the tool.
3. Wear protective clothing designed for the work environment and
tool.
4. Non-skid footwear is recommended to maintain footing and balance
in the work environment.
5. Wear steel toe footwear or steel toe caps to prevent a foot injury
from falling objects.
6. Wear a NIOSH approved respirator when working on materials that
produce hazardous fumes, dust or particulate matter.
7. This tool can cause hearing damage. Wear hearing protection gear
with an appropriate Noise Reduction Rating to withstand the decibel
levels.
Control the tool, personal movement and the work environment to avoid
personal injury or damage to the tool.
1. Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2. Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3. Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
WARNING! DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence to
the tool safety rules. If you use this tool unsafely or
incorrectly, you can suffer serious personal injury.
4
9 cu. ft 212cc Cement Mixer
For technical questions call 1-800-665-8685
V1.0