Usage; Care & Maintenance; Usage Notices; Maintenance - New Deal RFID Manuel D'utilisation

Usage

Activate Panel
1. When the keypad is in sleep mode, touching any button of the keypad could activate the keypad.
2. After being activated, the keypad would synchronize the real-time status with the alarm system
immediately, the result would be represented by the status bar.
3. When there is no operation on the keypad, it will sleep within 10 seconds.
4. When the keypad is sleeping, it will not react to any signal sent from the system until the next
activation.
Why sleep?
Since this keypad is designed to be able to work with battery only, sleeping is the solution for long-time use.
When the power adapter is connected, it starts providing power and charging the battery. With the help
with over-charging protective circuit, we recommend users to keep the adapter connected while using.
Arm/Disarm/Home Arm
Input the operation code, and press [Arm] [Disarm] or [Home Arm] key.
The status bar would flash once and then change the color as following
pattern after command is executed correctly.
[Arm] : Red
[Disarm] : Green
[Home Arm] : Blue
Note: The operation code is saved in the main panel, which can be modified
by App/PC client.
For GSM model, the keypad operation code is the same as Administrator
Password (1234 by default).
For networking model, the keypad operation code is the same as Device
Password (1234 by default).
Read the RFID tag on the keypad panel, the system would Disarm
immediately if the tag is paired before.
Once the system is in SOS status and the keypad is activated, the status
SOS
bar would be red-flashing and the keypad would generate beep alarm
sounds for 1 minute.
15
Care & Maintenance

Usage Notices

•The keypad should be connected to control panel before use.
•The power supply of keypad will probably impact on the transmitting distance of wireless signal.
•The keypad is compatible for most of our alarm system, contact the distributer for more detail.
•Please make sure the battery has been connected to the keypad before use.
•The keypad is neither waterproof nor moisture-proof, please install it in a shady, cool and dry place.
•To ensure the IR sensor works correctly, please keep it away from strong light.
•Install the keypad away from objects such as heater, air conditioner, microwave oven etc. that
produces heat or electric-magnetic.
•Take the keypad for disposal of recycling according to the local regulation.
•Do not take apart the product if you are not a professional technician.

Maintenance

•You can get most dust or fingerprint off with a dry, soft cloth or tissue.
•If there is dirt on the keypad, please wipe the surface by a soft cloth with a little dilute alkaline
detergent and then wipe again with a dry cloth.
16