Faq; Technical Specifications - New Deal RFID Manuel D'utilisation

FAQ

Problem Cause
Low Battery
No response
from keypad
Wearing Gloves
Keypad can't
No response from the alarm
be paired with
system.
the system
The RFID tag hasn't paired
with the alarm system.
Can't disarm by
the RFID tag.
Keypad is in power saving
mode.
[Arm]
[Disarm]
Wrong operation password
[Home Arm]
error
Solution
Please connect the power adapter to charge the
battery.If the problem is no solved, please contact
the distributer for more help.
Take off the glove and try pressing the keypad
again.
Make sure the alarm system is power ON and the
App or PC client has already connected to the
system.
If you were using the scanning QR code to pair
with, try using Learn Mode to see if there's any
error in the QR code.
Always make sure the location the keypad
installed can be covered by the RF signal sent
from the alarm system. You can use a paired
remote controller to do some tests.
Using the App/PC client to pair the RFID tag with
the system.
Touch any button of the keypad to wake it up.
Please input the right code. Users can modify the
operation code in App or PC client
17

Technical Specifications

System Preference
Working Humidity <=96%
Working Temperature (0- 60)℃
Power IN DC Jack. 5V2A
Battery Lithium-ion Battery, 890mAH
Wireless Frequency 433.92MHz
Wireless Range 200m without obstacle
Standby Time 6 months for daily use(8 times a day, Every times 30 seconds)
Weight 162.3g with backup battery
Size H-145mm, W-92.1mm
Status Bar 1 bar, 3 color(RED/GREEN/BLUE), upon the button area.
Power Switch X1, in battery cover.
Reset Button X1, pin hole, in battery cover.
Buttons 13 Touch buttons
RFID Area All area around the buttons in front.
FRONT : PC
Materials BACK : Non glassy surface to avoid scratches
WALL BRACKET : Non glassy surface to avoid scratches
Wall Mounting Using Mounting Bracket
Features
Supported, in battery only mode, the realtime status would be updated
Power Saving
only when keypad is activated.
Pairing Supports scanning QRCode or Learn Mode for pairing new one.
Low Battery Warning Supported. Color indicated, send signal to main box.
Tamper Alarm Supported
RFID Disarm Supported, up to 99 RFID tags.
Reset Supported
18