Preparation Before Use; Power On; Pair The Keypad With The Main Box; Pair The Rfid Tag With The Main Box - New Deal RFID Manuel D'utilisation

Preparation before Use

Power ON

ON
1. Make sure the battery has been
installed correctly.
2. If you are using it for the first
time, please connect the keypad to
the power adapter.
3. Turn on the power switch under
the battery cover.
13

Pair the Keypad with the Main Box

Scan QR Code
1. Reset the keypad until the status bar is flashing in 3 colors.
2. Launch the App, In the accessory management
section, tap [Add Accessory]
3. Scan the QR Code on the back of the keypad.
4. Follow the guideline in App and save the
settings.
The keypad will beep once when the pairing process is finished.

Pair the RFID Tag with the Main Box

Scan QR Code
1. Make sure the keypad has been paired with the system.
2. Launch the App, In the accessory management
section, tap [Add Accessory]
3. Scan the QR Code on the back of the keypad.
4. Follow the guideline in App and save the
settings.
You can try disarming the system by reading the RFID tag via keypad after pairing, to check if the tag has
been correctly paired.
Learn Mode
(Model Pro L9)
2. Launch the App (For networking alarm system)
or PC client (For GSM alarm system only) to enter
the Learn Mode
3. Press 1234 + Arm to send signal to the system.
4. Follow the guideline in App/PC client and save
the settings.
Learn Mode
2. Launch the App (For networking alarm system)
or PC client (For GSM alarm system only) to enter
the Learn Mode
3. Read the RFID tag by waving it closing to the
button area until hearing a beep sound.
4. Follow the guideline in App/PC client and save
the settings.
14