Publicité
-
If the infrared sensor is activated, it can be triggered frequently when there is an obstacle
within 30 cm of the front of the litter box or the floor is highly reflective (shiny tiles, glass,
etc.). Users can choose to deactivate the infrared sensor or put the litter box elsewhere.
-
If it is necessary to use a litter box mat, it is recommended that the thickness of the mat
should not exceed 3 cm.
Switching on and self-testing
1. Switching on: use the original adapter to plug the litter box into the mains and make sure
that the voltage of the socket is stable.
2. Self-testing: the litter box will perform a self-testing process for the first 6 minutes.
When finished, the self-cleaning mode will be activated by default and the "Auto"
indicator light will turn on. The appliance is now ready for use.
Attention
-
Do not move the litter box when it is switched on or in operation. If you lift the litter
box for more than 5 s, the anti-gravity protection lock will be activated (no cleaning or
litter replacement). It will be necessary to manually spread or level the litter or wait 30
minutes for an automatic re-adjustment calibration to be performed and then resume
normal operation.
-
The user can choose to use the litter box without an infrared sensor. In this way, the
gravity sensors will continue operating with normality, since the litter box is designed to
be used safely by the cat.
-
If, during self-testing the error indicator light switches on, the test has not been
performed successfully. Switch off the barrel and check that it is properly installed before
performing the self-testing again.
4. OPERATION
Indicator lights
-
Error indicator light: it lights up if the litter box is not properly installed on the base or
cannot rotate normally.
-
Full tank indicator light: it lights up when the waste tank is almost full, indicating that the
waste bag should be changed.
-
Wi-Fi indicator light: it lights up when the appliance is connected to Wi-Fi.
-
It flashes when the appliance is connecting to Wi-Fi. It remains off when the appliance is
not connected to Wi-Fi.
-
Power indicator light: it lights up when the appliance is switched on.
Touch icons
-
Clean: press "Clean" to start a cleaning cycle.
PUMBA 8000 CLEANKITTY SMART
ENGLISH
43
Publicité
