Publicité
Les langues disponibles
Les langues disponibles
EN
5.5 - Charging settings
INPUT CURRENT
In main loop "Input Current" interface, by long pressing (>3S)
you can access secondary one-way loop. In secondary loop, by
short pressings
pressing
you can change values, while a long-pressing
5.6 - Load working mode
OUTPUT CURRENT
n main loop "Output Current" interface, by long pressing(>3S)
you can access secondary one-way loop. In secondary loop,
by short pressing
pressin
you can change values, while a long-pressing (>S3)
Code
L00
L01
L02
Different load controlling modes define parameters adjustable and interface displayed.
* period adjustable separately.
L00
on
L01
on
off
L02
on
off
24
FLOAT CHARGE VOLTAGE
you can circulate interfaces, and by short
VOLTAGE OF LVD
LOAD-ON DURATION
BEFORE DAWN
you can circulate interfaces, and by short
Working mode
Load always active (DEFAULT)
Sunlight control with switch off at sunset and switch on at sunrise (NIGHT 1)
Sunlight control with switch switch off point after sunset (time adjustable) and switch on before
sunrise (NIGHT 2)
night*
ABSORPTION
CHARGE VOLTAGE
(>3 S)
enables data saving and exit, and a 20s absence of
operation bring you to main loop interface with data unsaved.
Note: Only parameters of USr type are adjustable.
VOLTAGE OF LVR
LOAD-ON DURATION
AT NIGHT
enables data saving and exit, and a 20s absence of operation
bring you to main loop interface with data unsaved. 3 working
mode for load as below. L00 is the default working mode (load
always active).
mode DEFAULT
mode NIGHT 1
mode NIGHT 2
EQUALIZED
CHARGE VOLTAGE
LOAD WORKING MODE
LOAD SWITCH-ON POINT
(SUNLIGHT LEVEL)
dawn*
Publicité
