Publicité
Les langues disponibles
Les langues disponibles
Use skills: The key to cutting the ceramic tile is whether the line is uniform,
continuous, and clear from beginning to end. The knife wheel is made of a special
super-hard alloy, and its hardness is far beyond the surface hardness of the
ceramic tile. Therefore, as long as the handle is held with a small force and the
knife wheel is pushed quickly and smoothly, a cutting line can be drawn on the
surface of the ceramic tile. This is the same with the glass. However, too hard a
conduit not only makes the cutting line into serration, and tile edge will appear as
an uneven section but also make the blade of the knife wheel collapse,
significantly shortening the expected
service life of the knife wheel.
Laser Device Instruction
Requirement :2 AAA batteries
1, There are four screws for the laser
device.2pcs of AAA batteries are required,
please turn off the power when not in use.
If the battery is exhausted, replace it.
- 8 -
Publicité
