Publicité
Les langues disponibles
Les langues disponibles
Remove the suction wand from the pure water bottle and submerge the
bottle cap end into pail (A), taking care to ensure that the metal hose clamp
connecting the hose to the suction wand is totally immersed in the
water/bleach solution for ten minutes and then wash the underside of the
cap and suction tube exterior with a clean paper towel. If using the optional
faucet, disconnect the tubing. Remove the faucet, immersing it in the
water/bleach solution for ten minutes. Wash the faucet exterior with a clean
paper towel; install the faucet and reconnect the tubing. Place the suction
wand into a clean, empty pail (B) and dispose of the solution pail (A).
Refill the cleaned pail (A) with two (2) gallons of hot tap water(135°
F/57.2°C), adding one (1) ounce of household bleach. Then, place the
suction wand into the pail with the bottle cap up.
Disconnect the discharge tube from the faucet or the refrigerator and place
it in the empty second pail (B). (Do not use pail with clean water and
chlorine solution)
Turn the tum dispensing system on by placing the on/off switch in the on
position. Dispense all of the chlorine solution into pail (B). Place the
discharge tube into pail(A), dispose of the bleach, and rinse pail (B).
Replace the tube with pail (B).
Publicité
