Safety Instructions; Use Precautions - Vevor Rf-Qj003 Mode D'emploi

WARNING:
Read this material before using this product. Failure to do so can
result in serious injury.
Assembly precautions
1. Assemble should be only according to these instructions. Improper assembly
can result in hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during
assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or
medication.
6. The product capabilities apply to properly and completely assembled products
only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting
the Gun Rack.
8. For additional information regarding the parts listed in the following pages,
please refer to the Assembly Diagram of this manual. Unwrap and separate all
parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.
2. T
HIS PRODUCT IS NOT A TOY
.
ITEM
3. D
O NOT EXCEED WEIGHT CAPACITIES
4. U
SE ONLY ON A FLAT
SUPPORTING A FULLY LOADED
5. U
SE AS INTENDED ONLY
6. I
NSPECT BEFORE EVERY USE
SAVE THIS MANUAL

SAFETY INSTRUCTIONS

. D
O NOT ALLOW CHILDREN TO PLAY WITH OR NEAR THIS
.
, ,
LEVEL HARD AND SMOOTH SURFACE CAPABLE OF SAFELY
G R
UN ACK
.
;
DO NOT USE IF PARTS ARE LOOSE OR DAMAGED
.
- 2 -
.