VEVOR FWC26 Mode D'emploi page 5

E Overcoil 1 J EVA 4
Attention:
For additional information regarding the parts listed above, please
refer to the Assembly Diagram of this manual. Unwrap and separate all
parts in a clear work area.
ASSEMBLY STEP
1. Take the product out of the packaging and open it.
2. Install the shelf support. Please note that there are 4 adjustable
installation slots upon opening for adjusting the height of the middle shelf.
However, it can only be folded when installed in the second hole from the
top.
D
- 4 -