VEVOR WD-A-02250-A00-0 Mode D'emploi page 3

WARNING: The jack must be used only on hard level surfaces and be free
to roll during lifting and lowering. Do not get under a vehicle that is supported only
by a trolley jack-use support stands.
CAUTION: Carefully read instructions and procedures for safe operations.
INSPECTIONS
1. Before Each Use
Visual inspection should be made before each use of the garage jack for
abnormal conditions such as cracked welds, leaks and damaged, loose, or
missing parts.
2. After Each Use
The garage jack should be inspected immediately if the lift is believed to have
been subjected to an abnormal load or shock. It is recommended that inspection
be made by manufacturer's or supplier's authorised repair facility.
RECOMMENDATION FOR SAFE USAGE OF THE JACK
1. The jack should be used on a hard level surface and be free to roll during
lifting and lowering.
2. The unlifted wheels of the vehicle should be chocked.
3. The load should be centrally located on the head cap.
4. No person should remain in a vehicle that is being lifted.
5. The jack should be used for lifting and lowering only. The raised vehicle should
be supported on vehicle support stands.
6. No person should get their body under a vehicle that is supported only by a
hydraulic trolley jack.
7. The vehicle manufacturer owner's manual should be consulted prior to the
lifting of the vehicle.
8. Make sure that the lift point is stable and properly centered on the head cap.
9. Do not move or dolly the vehicle while on the jack.
DESCRIPTION OF THE SYMBOLS
2