Automation - Kalorik Huvi R1 Mode D'emploi

• By default, this function is enabled when
first powering on the product.
SCHEDULE CLEANINGS
• Select "Schedule" (Fig. A), then select
"Add" to select the time and
parameters (Fig. G).
• Select the parameters for the cleaning
schedule, then select "Save" in the upper
right corner (Fig. H).

AUTOMATION

• Using the "Automation" function, you can set HUVI to run automatically
according to the parameters you select in the HUVI app.
• Select the
• Select the "Smart" icon (
• Select the
• Set the condition you wish HUVI to run under (Fig. K).
― "Launch Tap-to-Run" allows you to set commands for HUVI
which HUVI will follow with one touch on the app.
― "When weather changes" allows you to set commands for
HUVI, depending on the weather.
― "Schedule" allows you to set a schedule for HUVI to perform
specific tasks.
― "When the device status changes" allows you to set
commands for HUVI, depending on HUVI's status. For example,
you can direct HUVI to return to the charging base depending
on the filter life.
Fig. I
www.KALORIK.com
icon (Fig. A) to access the HUVI app Home Screen (Fig. I).
) on the bottom of the screen.
icon in the upper right (Fig. J).
Fig. J
23
Fig. H
Fig. K
220131