Connecting To The Huvi App - Kalorik Huvi R1 Mode D'emploi

― Place physical barriers in front of fireplaces or any other areas that
could damage HUVI.
― Keep HUVI away from spaces lower than 3.57 in. / 8 cm to prevent it
from getting stuck. If necessary, place physical barriers to block
problem areas.
― HUVI may climb on top of objects less than 0.63 in. / 16 mm tall.
Remove these objects if possible.
― For best results, HUVI should be within 3 meters when returning to the
charging dock.

CONNECTING TO THE HUVI APP

Before starting, make sure that:
•
― HUVI is fully charged, turned on, and close to your wireless router.
― Your smart device is connected to a WiFi network.
― The 2.4 GHz signal is enabled on your wireless router.
IMPORTANT: HUVI will only connect to the router through the 2.4 GHz signal!
• Download the HUVI app by using your smart device's camera to scan
the QR code (Fig. A), or by searching for the app on your smart
device's app store.
• Once the download is complete, open the app on your smart device.
Follow the onscreen instructions to create your account.
www.KALORIK.com
Fig. A
13
220131