Monitor Ports; Stand Installation - Fox Spirit PGM315 Manuel D'utilisation

Monitor ports :

Audio Output: Insert an audio jack connector into this port to receive the audio signal
from your monitor.
DP Connector: Insert a DP connector into your computer's port and the second connector
into your monitor's port.
HDMI Connector: Insert a HDMI connector into your computer's port and the second
connector into your monitor's port.
DVI Connector: Insert a DVI connector into your computer's port and the second
connector into your monitor's port.

Stand installation :

Keep the protective foam under your monitor while installing the stand.
1. Open the package, take out the product out with the protective foam still attached and gently
lay it flat on a desk or table.