Publicité
M E N U : S Y S T E M
This menu contains all the settings to configure and manage the
device
SUB MENU
OPTION / VALUES
12 Character Label
0-999
Disable
Display Timeout
10s, 30s, 1m, 5m, 10m Display goes dark after this time
Screen Brightness
1-10
LED Brightness
0-10
Device Info
Home Screen
Cue Browser
Universe 1
Universe 0
Lock
Manual
PIN: 000 (011)
Lock:
000
(011)
Wait for Data
Send 0
Forever, 0s, 10s, 30s,
Hold Last Look
1m, 5m, 10m, 60m
Fade to 0
0-60s (30s)
Disable DMX
Save Config
Config Saved
Load Config
Config Loaded
All Disable
All Enable
Pin: 000 (011)
Confirm
Pin: 000 (007)
Confirm
14
Set a device name
Set an optional device ID
Display stays on indefinitely
Adjust the brightness of the internal display
Adjust the brightness of the front LEDs. Set to 0 to
disable them.
The display shows port and connectivity information
The display shows a list of stored cues which can easily
be browsed and started by the encoder wheel
Universe 1 is sent to Art-Net 0-0
Universe 1 is sent to Art-Net 0-1
Disable
The device does not require a pin
Timeout
The device asks for a pin after the display times out
Lock/Unlock
Lock the device immediately
No DMX is sent until valid data is received for the ports.
The last incoming values continue to be sent on the ports
until the time is expired. Once timeout has completed,
the device will perform one of the below actions
The last incoming values continue to be sent on the ports
until the time is expired. Once timeout has completed the
device will perform one of the below actions.
Crossfade to DMX 0. Set to 0s for instant out.
DMX traffic is turned off on all ports
Save current configuration including all cue data
Reload configuration. Backups can be exported and
imported from the web interface
Disables RDM processing on the device
Enables all RDM processing on the device
Device will
be reset
Reset the device to factory default. It will reload NETRON
to factory
Preset 1. All cues are deleted, and all settings are set to
defaults. Yes/
default.
No
Device will be
reset to User
Reset the device to User Preset 1.
Preset 1. Yes/
No
DESCRIPTION
Publicité
