Overview; Start-Up; Inserting/Changing Batteries - Ade Be2102-1 Mode D'emploi

Overview

Overview
1
Display
2
UNIT button (bottom): Changing the unit of measurement
3
Battery compartment (bottom)
4
Weighing surface

Start-up

Inserting/changing batteries

For use you need 3 batteries of type AAA, 1.5 V (included). The battery compartment is
located on the underside of the device.
1. Push the locking tab of the battery compartment cover towards the battery
compartment and remove the cover.
2. Insert the batteries as indicated at the bottom of the battery compartment. Pay
attention to the correct polarity (+/-).
3. Replace the battery compartment cover.
The locking tab must snap audibly into place.
14
1 2 3
4
BE2102 | BE2102-1 bathroom scale