Lifting/Lowering The Motor Head; Attaching/Removing The Flat Beater, Flex Edge Beater*, Wire Whip, Or Dough Hook - Kitchenaid 5Ksm175Psber Mode D'emploi

USING THE STAND MIXER

LIFTING/LOWERING THE MOTOR HEAD

To lift motor head: Push the locking
lever to the UNLOCK position and
1
lift the head. Once lifted, the lever
will automatically go back in LOCK
position to keep the head lifted.
NOTE: Motor head should always be in LOCK position when using the Stand Mixer.
ATTACHING/REMOVING THE FLAT BEATER, FLEX EDGE BEATER*,
WIRE WHIP, OR DOUGH HOOK
* Included with select models only. Also available as optional accessory.
12 | USING THE STAND MIXER
To put down motor head: Push the
locking lever to UNLOCK and gently
bring the head down. The locking
2
lever will automatically go back in
LOCK position when the head is
down. Before mixing, test lock by
attempting to raise motor head.
To attach accessory: Turn speed
1
control to "0". Unplug Stand Mixer.