DPlus Automation Systems RAILX-C Manuel Technique D'installation page 8

LED MEANINGS TABLE
N° LED
1 RADIO
2 CLOSE
3 OPEN
4 PROGRAMMING
5 START
ON ON ON ON ON ON ON ON
1 2 3 4
5 6 7 8
DIP 1
AUTOMATIC CLOSING:
ON Door closes automatically after waiting the a.c. time.
OFF
Door does not close automatically.
DIP 4
SAFETY FUNCTION (photocell):
ON ANALOG Contact (8.2KΩ)
OFF N.C Contact (put a jumper if not used)
DIP 5
COURTESY LIGHT (LED 10):
ON Switched off
Switched on (with sthe START command, LED work for 30 sec)
OFF
FLASHING LIGHT OUTPUT (LAMP RELAY):
DIP 6
Light blinks until the operator is running or waiting for automatic closing.
ON
It turns off after 30 seconds the operator stop.
Light is fix until the operator is running or waiting for automatic closing.
OFF
It turns off after 30 seconds the operator stop
DIP 7
SLOW START CLOSING
ON
The automation during closing start at slow speed.
OFF
The automation during closing start at normal speed.
OPERATOR RUNNING DIRECTION:
DIP 8
Normale polarity
ON
Reversed polarity
OFF
FLASHING LIGHT CONNECTION
Flashing light output relay (terminals 11-12)
DESCRIPTION
DIP SWITCHES FUNCTIONS
Ground
N° LED
6 PHOTOCELL
7 STOP
8 CLOSURE LIMIT SWITCH
9 OPENING LIMIT SWITCH
10 COURTESY LIGHT
L
Power supply
230V
N
DESCRIPTION
LAMP
RELAY
LAMP
11 12
230V