Assembly & Installation; Charging The Battery Pack - Pro-Point 8886442 Mode D'emploi

V1.0
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the contents are included.
Contents:
• Blow moulded case • Battery powered grease gun
• Flexible hose
• Battery charger
IDENTIFICATION KEY
A Pipe
B Head Unit
C Barrel
D End Cap
E Coupler
F Plunger Rod Handle
G Pressure Valve
H Bulk Loader
I Trigger
J Grip
K Battery
L Battery Release
ASSEMBLY & INSTALLATION

CHARGING THE BATTERY PACK

NOTICE! Battery temperature will increase during and shortly
after use. Allow the battery pack to cool to room temperature
before charging otherwise batteries may not accept a full charge.
NOTICE! Do not recharge the new battery unless it is completely
depleted. All new guns come with an 80% charge from the
factory. No charging is needed until it is used and the battery is
run down completely.
Visit www.princessauto.com for more information
19.2V Cordless Grease Gun
• Pressure valve
• NI CD 19.2V battery packs (2)
• Shoulder strap
8886442
Fig. 1
7