ETI Solid State Lighting ST-4FT-4900LM-50K-MV-LVD-EM Guide D'utilisation Et D'entretien page 5

Installation Instruction (continued)
4
Attaching the Strip Light
to aircraft cable
□ Install "S" shaped hook of aircraft
cable (BB) on the LED Strip Light (A).
□ Repeat this step on the other side of
the LED Strip Light (A).
□ Adjust aircraft cable to level light at
the proper height by quick cabel-
lock.
5
Connecting the electrical wires
□ Make the electrical connections:
Black wire to black wire.
White wire to white wire.
Ground wire to ground wire.
Use wire connectors to cover the wire connections and cover with electrical tape.
Connect the pink and purple wires from the fixture to the same color wires in the electrical box.
□ Cover the wire connection with the wire nuts (AA).
Note:Provide with a suitable strain relief means (such as a knot) at the end of input cord of outlet box.
Quick Cabel-loc k
AA
BB
5
R
CC
Please contact 1-855-384-7754 for further assistance.
Quick Cabel-loc k
BB
A
www.ETiSSL.com