ETI Solid State Lighting ST-4FT-4900LM-50K-MV-LVD-EM Guide D'utilisation Et D'entretien page 3

Pre-Installation
PLANNING INSTALLATION
Before beginning assembly, installation, or operation of product, make sure all parts are present. Compare parts with the Hardware Included
and Package Contents lists. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact customer
service for replacement parts.
NOTE: Keep your receipt and these instructions for proof of purchase.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.
TOOLS/HARDWARE REQUIRED
Tools and hardware required vary by type of installation.
Wire
Strippers
Flathed
Screwdriver
PACKAGE CONTENTS
Part Description
A LED 4 FT. STRIP LIGHT
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description
AA Wire Nuts
BB Aircraft Cable
CC Mounting Screw (0.6in not included)
Mounting Bracket (4in not included
R
(Comply with UL/cUL listed IFFX)
Safety
Goggles
Phillips
Screwdriver
Quantity
1
A
Quantity
6
2
2
1
Ladder
Wire
Cutters
AA
CC
3
Please contact 1-855-384-7754 for further assistance.
Gloves
Power Drill
with 1/8
drillbit
BB
R
www.ETiSSL.com