ETI Solid State Lighting ST-4FT-4900LM-50K-MV-LVD-EM Guide D'utilisation Et D'entretien page 4

Installation Instruction
1
Mounting to drywall
□ Drill two hole (distance between two hole is 40.7in) in the ceiling.
□ Make sure to fasten the combo wood-machine end into the metal hook.
□ Tighten the Drywall Screw (not included) into the wood.
Drywall Screw
2
Mounting to wood
□ Drill two hole (distance between two hole is 40.7in) in the ceiling to clear the closed flaps of the Toggle Bolt (not included).
□ Make sure to fasten the toggle bolt into the butterfly nut before inserting the flaps into the ceiling.
□ Tighten the toggle bolt.
Toggle Bolt
3
Attaching the aircraft cable to the ceiling
□ Hang the aircraft cable (BB) on the ceiling.
Quick Cabel-loc k
AA
BB
R
CC
4
Drywall Screw
Toggle Bo lt