Trouble Shooting Guide - Danby Designer DCD5505W-1 Manuel D'utilisation

Trouble Shooting Guide

Some problems are minor in nature and can be
easily resolved without having to call for service.
The following guide list some of the problems you
should check before calling for service.
Malfunction
The machine doesn't
operate:
The socket is energized, but
the drum doesn't rotate:
Wet laundry:
Laundry not uniformly dried:
After you have considered all the above stated
instructions and the problem still cannot be
eliminated. Please call the nearest Danby
authorized service agent or call our Toll Free
Number (1 800 26 DANBY) and ask for customer
assistance.
Any claim or malfunction caused by improper
installation or misuse is not covered by the
manufactures warranty. All repair costs shall be
covered by the user.
14
USER-MAINTENANCE INSTRUCTIONS
Check the following:
− Check the supply in the outlet socket and the fuse.
− Make sure the cable cord is correctly plugged into the socket.
− Is the door correctly closed (if not, push them towards the
machine).
− if the program is started by pressing the START button;
− if the correct drying time is set, or if appropriate program is
selected.
− Is the fluff filter clean?
− Is the amount of loaded laundry too large?
− Is the vent pipe too long?
− if the laundry loaded into the appliance had been dried enough,
or if the appropriate program has been selected.
− Is the amount of loaded laundry too large?
− Does the load consist of only large pieces of laundry (always load
smaller and larger pieces together).
− Does the load consist of laundry made of different materials
(always load clothes made of similar fabrics).
Instructions for Use
If you are unable to resolve the problem after
checking this guide, call our Toll Free Number (I
800 26 DANBY) and ask for assistance.
WE RESERVE THE RIGHT FOR MODIFICATIONS
WITH NO INFLUENCE ON THE OPERATION OF
THE APPLIANCE.
THIS INSTRUCTION MANUAL CANNOT BE A
REASON FOR A COMPLAINT.