Publicité
Les langues disponibles
Les langues disponibles
LOADING THE RACKS
UPPER RACK
(loading example for the upper rack)
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjust-
ed: high position to place bulky crockery
in the lower basket and low position to make
the most of the tip-up supports by creating
more space upwards and avoid collision with
the items loaded into lower rack.
The upper rack is equipped with a Upper
Rack height adjuster (see figure), without
pressing the levers, lift it up by simply hold-
ing the rack sides, as soon as the rack is stable
in its upper position. To restore to the lower
position, press the levers A at the sides of the rack and move the basket
downwards.
We strongly recommend that you do not adjust the height of
the rack when it is loaded.
NEVER raise or lower the basket on one side only.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be fold
or unfold to optimize the arrange-
ment of crockery inside the rack.
Wine glasses can be placed safe-
ly in the foldable flaps by inserting
the stem of each glass into the corre-
sponding slots.
Depending on the model:
– to unfold the flaps there is needed
to slide it up and rotate or release
it from the snaps and pull it down.
– to fold the flaps there is needed
to rotate it and slide flaps down
or pull it up and attach flaps to
the snaps.
Load delicate and light dishes:
glasses, cups, saucers, low salad
bowls.
LOWER RACK
(loading example for the lower rack)
CUTLERY BASKET
For pots, lids, plates, salad
bowls, cutlery etc. Large plates
and lids should ideally be
placed at the sides to avoid in-
terferences with the spray arm.
It is fitted with top grids for improved
cutlery arrangement.
It must only be positioned at the front
of the lower rack.
Knives and other utensils with sharp
edges must be placed in the
cutlery basket with the points facing
downwards or they must be
positioned horizontally in the tip-up
compartments on the upper rack.
EN
5
Publicité
