Télécharger Imprimer la page
Les langues disponibles

Les langues disponibles

Liens rapides

H-674, H-932
TAPE DISPENSER WITH
RETRACTABLE BLADE
1.
Place dispenser on flat surface. Push tape roll fully onto
tape wheel. Be sure tape unwinds with sticky side down.
(See Figure 1)
2. Unroll 5-6 inches of tape (sticky side down) and thread
between smoothing roller and metal loading gate.
(See Figure 2)
3. Pull tape over smoothing roller allowing tape to unroll
freely off tape wheel. (See Figure 3) To unwind tension,
see Figure 4.
Figure 1
A
PAGE 1 OF 3
1-800-295-5510
uline.com
Tape Pressing
Wiper
Tape Smoothing
Roller
Tape Cutting
Blade
Adhesive Side
Of Tape Down
Metal Loading Gate
OPERATION
Figure 2
PARTS
Adjustable
Unwind Tension
Knob
4. Start desired depth on the side of the box.
(See Figure 5, A)
5. Glide dispenser along the carton seam - smoothing
roller automatically presses tape to the package.
(See Figure 5, B)
6. Continue down the opposite end to desired length.
In one motion, tilt dispenser forward so tape pressing
wiper stops rolling tape, serrated blade cuts tape and
wiper smoothes the tape end. (See Figure 5, C)
B
Para Español, vea página 2.
Pour le français, consulter les page 3.
Figure 3
Figure 4
Figure 5
C
0621 IH-674
loading

Sommaire des Matières pour Uline H-674

  • Page 3 H-674, H-932 1-800-295-5510 uline.ca DÉVIDOIR DE RUBAN ADHÉSIF À LAME RÉTRACTABLE PIÈCES Languette De Pression Rouleau De Bouton Lissage De Ruban De Tension Réglable Lame De Coupe De Ruban Côté Adhésif Vers Le Bas Porte De Chargement En Métal FONCTIONNEMENT Déposez le dévidoir sur une surface plane.

Ce manuel est également adapté pour:

H-932