Uline H-4795 Mode D'emploi

H-4795, H-4796
H-4797
WALL-MOUNT
WIRE SHELVING
(1 SHELF)
TOOLS NEEDED
Cordless Drill
(7/32" Drill Bit)
Tape Measure
Shelf Bracket x 2
Screw x 12
1. Mounting brackets should be spaced 1½" shorter
than the width of the shelf. Do this by measuring
from the center of one mounting bracket to the
center of the other. Drill top mounting brackets to
the wall using two anchors and two screws for each
mounting bracket. (See Figure 1)
Figure 1
PAGE 1 OF 6
1-800-295-5510
uline.com
Step Ladder
(Optional)
Phillips
Screwdriver
Shelf Support x 2 Anchor x 12
Bolt x 4
INSTRUCTIONS
PARTS
Mounting Bracket x 4
Post x 2
2. Align center mounting brackets directly below the
top mounting bracket. Mount center mounting
brackets using two anchors and two screws for each
center mounting bracket. Ensure there is enough
space between the mounting bracket and center
mounting bracket for the shelf bracket to fit.
(See Figure 2)
Figure 2
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Center Mounting Bracket x 2
Shelf x 1
Mounting
Bracket
Center Mounting
Bracket
1123 IH-4795