Serial Port; Universal Serial Bus Ports - Fujitsu LifeBook E780 Guide D'utilisation

Serial Port

The serial port, or COM port, located on the system
and on the optional Port Replicator allows you to
connect serial devices, such as printers or scanners.
In order to connect a serial interface device follow
these easy steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
3
Tighten the two hold-down screws, located on each
side of the connector.

Universal Serial Bus Ports

The Universal Serial Bus 2.0 ports (USB) allow you to connect USB devices such as external game pads,
pointing devices, keyboards and/or speakers. There are four USB 2.0 ports on your notebook: three on the
right side and one on the left.
In order to connect a USB device follow these steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
M
ICROSOFT
TO ATTACH THE DEVICE
AFTER THE SYSTEM BOOTS UP BEFORE ATTACHING THE
I
F YOU PREFER NOT TO WAIT TO CONNECT YOUR
. T
FEATURE
P O
OWER
THEN SELECT
COMPLETE THE PROCESS
W V
INDOWS ISTA USERS ONLY
BEFORE
TURNING ON YOUR SYSTEM
, S > C
O DO SO GO TO TART ONTROL
> C
PTIONS HANGE PLAN SETTINGS
D
ISABLED FROM THE PULL
.
88 - Device Ports
Figure 28. Connecting a Serial Device
: W USB
HEN ATTACHING A DEVICE
, OR,
WAIT FOR APPROXIMATELY THREE MINUTES
USB .
DEVICE
USB ,
DEVICE YOU MUST DISABLE THE
P . I
ANEL N THE LEFT PANEL
> C
HANGE ADVANCED POWER SETTINGS
- USB
DOWN MENU FOR SELECTIVE SUSPEND SETTING
, : B
DO ONE OF THE FOLLOWING
S S
ELECTIVE USPEND
, C . C
SELECT LASSIC VIEW LICK ON
. S USB
ELECT SETTINGS
. C [OK]
LICK
E SURE
,
TO