Kokido TELSA 50 Manuel D'emploi page 11

Masquer les pouces Voir aussi pour TELSA 50:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

WARNING!
 DO NOT handle the pool vacuum, external adaptor and charging base while it is
charging with wet hands and without shoes.
 Connect the external adaptor to the power source through a residual current device
(RCD).
 Charge the pool vacuum with the original external adaptor provided.
 DO NOT use power extension cords.
 Fully charge the battery before first use.
 Charging must be done indoors, in a dry & well-ventilated area away from sunlight,
children, heat, ignition sources, and with an ambient temperature between 5˚C (41˚F)
and 35˚C (95˚F).
 Always disconnect the external adaptor from the power source when charging is
complete.
 Do not leave the pool vacuum in charge for over 20 hours.
 Immediately turn the power off and disconnect the external adaptor from the power
source if you detect any of the following conditions:
-
Offensive or unusual odor
-
Excessive heat
-
Deformation, cracks, leaks
-
Smoke
1. Make sure that the pool vacuum is turned off prior to charging.
2. Connect the external adaptor to the power source. Once the pool vacuum begins
charging, the indicator light on the external adaptor will turn red. Normally, it takes
about 5-6 hours to reach a full charge. The indicator light will turn green when the pool
vacuum is almost fully charged.
Note: If the motor is generating noise, immediately turn off the device by pressing the
ON/OFF button. Otherwise, it could potentially lead to failure of the shaft seals / motor,
and the warranty will be voided as a result.
Note: Charge the pool vacuum completely (about 5-6 hours) prior to first use.
3. When charging is complete, disconnect the external adaptor from the power source
and unplug the jack from the charging base.
4. Detach the charging base from the pool vacuum.
Normally the pool vacuum can be operated up to 40 minutes on a full charge
(charged for about 5- 6 hours)
Note: Clean the filter regularly. Too much debris inside the filter will increase burden
to the motor operation and then shorten the operating duration.
10

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ev50/17Ev50Yzaki 15Ev15Yzaki 50Ev51

Table des Matières